Tatra Rotalac Limited

CABLE SLEEVES (DOME CLOSURES)

SLEEVE 30A

 Complete assembly used for joints up to 50 pairs in Cables PET and PET armour
072123 (ABT0121 – 20)

SLEEVE 30A BASE

Includes insert
073147 (WBT0210)

SLEEVE 30A CLAMP

Hinged clamping collar
073011 (WBT1400)

SLEEVE 30A GASKET

‘O’ ring type gasket for sealing the cap to the base
073012 (CSL001)

SLEEVE 30D

Complete assembly, incorporating re-usable ports using heat shrink tubing. Used for radial distribution joints up to fifty pairs in Cable PET and Pet armour
073002 (ABT0911 – 20)

 

SLEEVE 31 BRANCH CLIP

An epoxy resin coated metal clip for ports having two cables that require sealing. Supplied as part of Sleeves 31B and 31C
072604 (ABT0941)

 

SLEEVE 31A

Complete assembly used for joints up to 100 pairs in Cable Pet and Pet Armour.
071823 (ABT0141 – 10)
 

SLEEVE 31A BASE

Includes insert
071914 (WBT0300)

SLEEVE 31A CLAMP

Hinged clamping collar. Also suitable for use with Sleeve 30B, 31B and 31C
071915 (WBT0280)

SLEEVE 31A GASKET

‘O’ ring type for sealing cap to base. Also suitable for use with Sleeve 30B, 31B and 31C
071916 (CSL002)

SLEEVE 31B

Complete assembly, incorporating five re-usable ports, using heat shrink tubing. Used for through distribution joints up to 100 pairs in Cables PET and PET armour
072532 (ABT0621 – 10)

SLEEVE 31B BASE

Base section only for Sleeve 31B
072602 (CMD003)

SLEEVE 31C

Complete assembly, incorporating seven re-usable ports using heat shrink tubing. Used for radial distribution joints up to 100 pairs in Cable PET and Pet armour
072533 (ABT0631 – 10)

SLEEVE 31C BASE

Base section only for Sleeve 31C
072603 (CMD004)

SLEEVE 32B

Complete assembly used for joints up to 200 pairs in Cables PET and PET armour. Similar to Sleeve 32A but with modified compartments
072223 (ABT0151 – 8 )

SLEEVE 32B BASE

Plastic Base with large compartment, for joints up to 200 pairs
073143 (WBT0360)

SLEEVE 32B CLAMP

Hinged Clamping Collar – Click here to see Product Sheet
073146 (WBT1440)

SLEEVE 32B GASKET

‘O’ ring type for sealing cap to base – Click here to see Product Sheet
073145 (CSL003)

SLEEVE 32K

A complete sleeve assembly incorporating seven re-usable ports, using heat shrink tubing. Used for radial distribution joints up to 200 pairs in Cable PET and PET armour
073064 (ABT0921 – 8 )

BRACKET CN 14051

Used to hold sleeve PE 8Ap, 32B and 32K on cable bearers and in Joint Box 23 and 26.
072730 (FBT0101 – 50)

BRACKET CN 14071

Used to hold Sleeve 31A, B and C on cable bearers and in Joint Box 23 and 26
073000 (FBT0111 – 50)

BRACKET CN 14089

Used to hold Sleeve 30A and 30D only, on cable bearers and in Box 23 and 26
073001 (FBT0121 – 50)

 

uk pla\stic extrusion injection moulding manchester telecommunications products

CLICK HERE TO SEE PRODUCT SHEETS

Exit mobile version